CDBMC - PM240 NICKEL ICP STANDARD
- MSDS: CDBMC
- Manufacturer: SPECTRUM CHEMICAL MFG CORP
- Product Name: PM240 NICKEL ICP STANDARD
- National Stock Number: 6810-00F052368
Product Identification
Product ID:PM240 NICKEL ICP STANDARD
MSDS Date:07/17/1996
FSC:6810
NIIN:00F052368
MSDS Number: CDBMC
Responsible Party
GARDENA, CA 90248-9985
US
Emergency Phone: 310-516-8000
Info Phone: 310-516-8000
Cage: 63415
Contractor
Telephone: 310-516-9843
Cage: 63415
Ingredients
NICKEL (SUSPECTED ANIMAL/HUMAN CARCINOGEN BY IARC GROUP 2B,
CAS: 7440-02-0
RTECS: QR5950000
Fraction By Weight: 0.1%
OSHA PEL 1 MG/CUM
ACGIH TLV: 0.05 MG/CUM IC
WATER
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 96.4%
NITRIC ACID, HYDROGEN NITRATE *96-4*
CAS: 7697-37-2
RTECS: QU5775000
Fraction By Weight: 3.5%
OSHA PEL 5 MG/CUM
ACGIH TLV: 5.2 MG/CUM
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:ORAL LD50(RAT): 5000 MG/KG NICKEL
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYES: CORROSIVE & SEVERE IRRITATION.
SKIN: CORROSIVE & BURNS. INGESTION: FATAL. INHALATION: FATAL,
SEVERE IRRITATION OF RESPIRATORY TRACT. SEVERE OVEREXPOSURE CAN
RESULT IN DEATH. SUBSTANCE IS TOXIC T O LUNGS, NERVOUS SYSTEM &
MUCOUS MEMBRANES. MAY CAUSE TISSUE DAMAGE TO MUCOUS MEMBRANES OF
EYES/MOUTH/RESPIRATORY TRACT.
Explanation of Carcinogenicity:SEE INGREDIENTS.
Effects of Overexposure:IRRITATION, COUGHING, CHOKING, SHORTNESS OF
BREATH, ULCERATIONS, REDNESS, WATERING, ITCHING, SCALING,
BLISTERING.
First Aid
First Aid:EYES: CHECK FOR & REMOVE ANY CONTACT LENSES. DON'T USE AN EYE
OINTMENT. SKIN: PLACE UNDER DELUGE SHOWER, WASH W/DISINFECTANT SOAP
& COVER W/ANTIBACTERIAL CREAM. NEUTRALIZE W/DILUTE SOLUTION OF
SODIUM CARBONATE. BE CAREFUL TO CLEAN
FOLDS/CREVICES/CREASES/GROIN. IF STILL SUFFERING, RINSE W/LUKEWARM
PASTEURIZED MILK & RINSE THOROUGHLY W/RUNNING WATER TO AVOID
POSSIBLE INFECTION. (SEE SUPP)
Fire Fighting
Flash Point:NON-FLAMMABLE
Extinguishing Media:NON-FLAMMABLE.
Unusual Fire/Explosion Hazard:SLIGHTLY EXPLOSIVE TO EXPLOSIVE IN
PRESENCE OF REDUCING/COMBUSTIBLE/ORGANIC MATERIALS.
Accidental Release
Spill Release Procedures:SMALL: ABSORB W/INERT MATERIAL, PLACE IN
APPROPRIATE WASTE DISPOSAL. NEUTRALIZE. LARGE: SAFELY STOP LEAK.
ABSORB W/DRY EARTH/SAND/OTHER NONCOMBUSTIBLE MATERIAL. DON'T GET
WATER INSIDE CONTAINER. KEEP DAMP W/WATER SPRAY. DON'T TOUCH
MATERIAL. (SUPP)
Neutralizing Agent:DILUTE SOLUTION OF SODIUM CARBONATE.
Handling
Handling and Storage Precautions:KEEP LOCKED UP. KEEP CONTAINER DRY.
KEEP AWAY FROM IGNITION SOURCES. STORE IN METALLIC/COATED
FIBREBOARD DRUM USING STRONG POLYETHYLENE INNER PACKAGE.
Other Precautions:DON'T INGEST. DON'T BREATHE GAS, FUMES, VAPOR/SPRAY.
NEVER ADD WATER TO THIS PRODUCT. AVOID CONTACT W/SKIN & EYES. STORE
CORROSIVE MATERIALS IN A SEPARATE SAFETY STORAGE CABINET/ROOM. KEEP
AWAY FROM C OMBUSTIBLE MATERIALS.
Exposure Controls
Respiratory Protection:WEAR A NIOSH/MSHA APPROVED
RESPIRATOR/SCBA/EQUIVALENT WHEN VENTILATION IS INADEQUATE.
Ventilation:EXHAUST/OTHER ENGINEERING CONTROLS TO KEEP AIRBORNE
CONCENTRATIONS OF VAPORS
Eye Protection:SPALSH GOGGLES
Other Protective Equipment:FULL SUIT, BOOTS, EYEWASH STATION & SAFETY
SHOWER.
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
BOILING POINT INFORMATION FOR NITRIC ACID, FUMING. PH (1%
SOLUTION/WATER): <7. FIRST AID: INHALATION: REMOVE TO FRESH AIR.
GIVE CPR/OXYGEN IF NEEDED. INGESTION: DON'T INDUCE VOMITING. DRINK
SEVERAL GL ASSES OF WATER/MILK. OBTAIN MEDICAL ATTENTION IN ALL
CASES. SPILLS: KEEP OUT OF SEWERS/BASEMENTS/CONFINED AREAS.
Chemical Properties
Boiling Pt:B.P. Text:180.7F SUPP
Vapor Pres:18.5
Vapor Density:0.62
Spec Gravity:1.01
pH:(SUPP)
Solubility in Water:INSOLUBLE
Appearance and Odor:CLEAR WHITE/LIGHT GREEN LIQUID W/DISAGREEABLE &
CHOKING ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
ALKALIS, REDUCING AGENTS, COMBUSTIBLE & ORGANIC MATERIALS, METALS,
ALUMINUM, ZINC, COPPER, STEEL, STAINLESS STEEL.
Stability Condition to Avoid:HEAT & OTHER IGNITION SOURCES.
Disposal
Waste Disposal Methods:RECYCLE TO PROCESS, IF POSSIBLE. DISPOSE OF
IAW/FEDERAL, STATE & LOCAL REGULATIONS. CORROSIVE LIQUID UN2031.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.